AC/DC Solar Borehole Pump 60m (4SP3-6)

R12,846.00 excl Vat

Product by:

Description

Power : 1HP (Max Input power 1.2KW)

Voltage : 60V-380VDC or 90V-240VAC

Max Head : 60M

Max Flow :  106L/Min

Solar Panel Specifications : 4*250W

Speed : 3600RPM

Power Supply : AC/DC

Motor Type : BLDC

Motor Type Water Filled

Controller Type : Build-in Electronic

Phase : Single

Max Submergence Depth : 150M

No panels included

Panels not included

AC/DC Solar Borehole Pump

4SP3-6

MOTOR 1 HP

Q.max.106 l/min H.max.60m

90-360VDC,1X90-240VAC,50/60Hz Motor-(4”*4”)-BSP 1.25”

Maximum OD 4”

APPLICATION AREA:

This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and living water. The living condition could be much improved. It also can be used for fountains.

MATERIAL OF PARTS:

Outlet: stainless steel
Pump body: stainless steel
Motor body: stainless steel
Bearing: C&U

ADVANCED TECHNOLOGY:

1.Application innovation
Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor.
2.Technics innovation
Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved.
3.Structure innovation
Oil filling, convenient installation and environmental protection

HIGHLIGHTS

  1. Energy-saving and environment-protected green products
  2. High technique products adopting MPPT and DSP chip technique.
  3. 100% copper wire, cold-rolled silicon steel sheet
  4. CE certificate
  5. Advanced three phase brushless DC motor
  6. Stainless steel 316 screws
  7. 3 years warranty

PRINCIPLE OF OPERATION:

Solar panel collects sunlight→DC electricity energy → solar controller(rectification, stabilization, amplification, filtering)→available DC electricity→(charge the batteries)→pumping water

ADVANTAGES OF SOLAR PUMP SYSTEM:

  1. It is easier and more widely used than any other dynamoelectric driven pumps.
  2. It is more economical and more environmentally friendly.

MODEL SELECTION:

  1. The power of solar panel = power of pump ×1.3
    The voltage of solar panel = the voltage of pump
    The controller should be matched
  2. Select the batteries according to the following formulas:
    The use hour of battery =
    The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example, the machine power is 200W, the battery
    capacity is 100AH,the voltage is 12V,and the battery is fully charged, then the use hour is:100÷(200÷12)×0.6=3.6hours
  3. The battery capacity=
    the use hour ÷0.6×(the machine power÷the battery voltage) For example, the machine power is 200W,the battery voltage
    is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×(200÷12)=100AH
Need Help? Chat with us